information

product

Facade CeramicTiles

Delta Elements Facade CeramicTiles is made from frost-resistant dry-pressed ceramic stoneware. The mosaics are fixed on sheets, secured by a transparent adhesive foil on the front, optional with a glued mesh on the reverse side. The surface is silk matt as standard. The product can be supplied in various formats and colors; special productions are possible for large quantities.

Frost-resistant facade ceramics (GL), group BIb, DIN EN 14411 ISO 13006 annex G, glazed

Areas of application

– As wall cladding in interior or exterior areas
– As cladding on exterior wall insulation systems (EWI systems), approved within the AbZ
– As cladding on suspended, rear-ventilated plaster support systems, approved within the AbZ
INSPIRATIONS
DOWNLOADS
PALETTE

Standard Formats

100 x 100 x 5 mm
150 x 50 x 5 mm
200 x 50 x 6 mm
240 x 40 x 6 mm

Special Formats

on request

Material Thicknesses

depending on format

Surfaces

silk-matt

HAVE YOU BECOME CURIOUS?

Our project managers will be happy to advise you.

Ask for our support

PRODUCT FEATURES

  • With general building approval for EWI and ventilated facade systems
  • Dry pressed stoneware, colored glazed
  • Classification according to EN 14411 ISO 13006 Annex G: group BIb
  • Various formats and colors available
  • Silk matt colors
  • Individual color mixtures for large quantities are possible on request
  • Fast processability of the sheets; transparent adhesive foil on the front
  • Very low water absorption and wet stretching
  • High resistance to stain and chemicals
  • Shock and impact resistance also on EWI systems
  • Good abrasion resistance and high breaking strength
  • Easy removal of paint smears/graffiti
  • Resistance to frost, de-icing salt, temperature changes and UV radiation
  • Low porosity with a low water absorption of ≤ 0,07%
  • No staining, sanding or algae formation
  • High color fastness/very low color variations
  • A1 fire protection classification of the covering according to DIN 4108
  • Natural wash-off in the rain due to factory HT-coating
  • Low maintenance effort compared to plastered surfaces
  • Can also be used as wall and floor cladding indoors

FACADE SYSTEMS

Delta Elements Facade CeramicTiles may be applied on different substrates. Here you can find constructional information and documents for the application of Facade CeramicTiles on EWI systems. We would be pleased to work with you on solutions for project-specific construction- and details-solutions.

All specifications and drawings do not constitute any guarantee in regards to the recommendations provided. Delta Elements assumes no liability and refers to its general business terms and conditions. No rights of any kind can be derived from the contents of this information. The respective current version and the general business terms and conditions can be found at www.deltaelements.eu; printing errors reserved.

Delta Elements Facade CeramicTiles can be processed on exterior wall insulation systems (EWI system) which are certified by construction authority. Our processing instructions, the processing instructions of the facade system manufacturers and the below listed DIN norms and guidelines have to be observed. You will find our processing instructions at the download center. Further technical information is available on request.
1  Delta Elements Facade CeramicTiles
2  System-joint mortar, slurry method
3  System-adhesive mortar
4  System-equalizing mortar layer
5  System-basic plaster with textile
6  System-thermal insulation plate, doweled through the textile
7  Sustainable massive ground

Standards and directives
DIN 18157 Installation of ceramic coverings using the glue-fixing method
DIN EN 12004 Mortar and adhesives for ceramic tiles and panels
DIN 18352 Tiling and paving
DIN 18515-1 Exterior wall cladding – tiles or panels applied with mortar
DIN 18540 Sealing exterior wall joints in building construction using joint sealing compound
DIN 18202 Dimensional tolerances for building construction
DIN EN 14411 Tolerances for ceramic tiles and panels
ZDB-leaflet: Expansion joints in tile and panel cladding and coverings

All specifications and drawings do not constitute any guarantee in regards to the recommendations provided. Delta Elements assumes no liability and refers to its general business terms and conditions. No rights of any kind can be derived from the contents of this information. The respective current version and the general business terms and conditions can be found at www.deltaelements.eu; printing errors reserved.

Delta Elements Facade CeramicTiles can be processed on suspended, rear-ventilated plaster support systems which are certified by construction authority. Our processing instructions, the processing instructions of the facade system manufacturers and the below listed DIN norms and guidelines have to be observed. You will find our processing instructions at the download center. Further technical information is available on request.
1  Delta Elements Facade CeramicTiles
2  System-joint mortar, slurry method
3  System-adhesive mortar
4  System-equalizing mortar (possibly)
5  System-basic plaster with textile
6  System-priming coat
7  System-facade carrier plate
8  Rear ventilation/aluminium construction
9  System-thermal insulation plate, doweled
10  Sustainable massive ground

Standards and directives
DIN 18157 Installation of ceramic coverings using the glue-fixing method
DIN EN 12004 Mortar and adhesives for ceramic tiles and panels
DIN 18352 Tiling and paving
DIN 18515-1 Exterior wall cladding – tiles or panels applied with mortar
DIN 18540 Sealing exterior wall joints in building construction using joint sealing compound
DIN 18202 Dimensional tolerances for building construction
DIN EN 14411 Tolerances for ceramic tiles and panels
ZDB-leaflet: Expansion joints in tile and panel cladding and coverings

All specifications and drawings do not constitute any guarantee in regards to the recommendations provided. Delta Elements assumes no liability and refers to its general business terms and conditions. No rights of any kind can be derived from the contents of this information. The respective current version and the general business terms and conditions can be found at www.deltaelements.eu; printing errors reserved.

Delta Elements Facade CeramicTiles can be processed on various sustainable massive walls. Our processing instructions, the processing instructions of the facade system manufacturers and the below listed DIN norms and guidelines have to be observed. You will find our processing instructions at the download center. Further technical information is available on request.
1  Delta Elements Facade CeramicTiles
2  Joint mortar, slurry method
3  Adhesive mortar
4  Equalizing mortar
5  Basic plaster with textile
6  Priming coat
7  Sustainable massive ground

Standards and directives
DIN 18157 Installation of ceramic coverings using the glue-fixing method
DIN EN 12004 Mortar and adhesives for ceramic tiles and panels
DIN 18352 Tiling and paving
DIN 18515-1 Exterior wall cladding – tiles or panels applied with mortar
DIN 18540 Sealing exterior wall joints in building construction using joint sealing compound
DIN 18202 Dimensional tolerances for building construction
DIN EN 14411 Tolerances for ceramic tiles and panels
ZDB-leaflet: Expansion joints in tile and panel cladding and coverings

All specifications and drawings do not constitute any guarantee in regards to the recommendations provided. Delta Elements assumes no liability and refers to its general business terms and conditions. No rights of any kind can be derived from the contents of this information. The respective current version and the general business terms and conditions can be found at www.deltaelements.eu; printing errors reserved.

Delta Elements Facade CeramicTiles can be processed on exterior wall insulation systems (EWI system) which are certified by construction authority. Our processing instructions, the processing instructions of the facade system manufacturers and the below listed DIN norms and guidelines have to be observed. You will find our processing instructions at the download center. Further technical information is available on request.
1  Delta Elements Facade CeramicTiles
2  System-joint mortar, slurry method
3  System-adhesive mortar
4  System-equalizing mortar layer
5  System-basic plaster with textile
6  System-thermal insulation plate, doweled through the textile
7  Sustainable massive ground

Standards and directives
DIN 18157 Installation of ceramic coverings using the glue-fixing method
DIN EN 12004 Mortar and adhesives for ceramic tiles and panels
DIN 18352 Tiling and paving
DIN 18515-1 Exterior wall cladding – tiles or panels applied with mortar
DIN 18540 Sealing exterior wall joints in building construction using joint sealing compound
DIN 18202 Dimensional tolerances for building construction
DIN EN 14411 Tolerances for ceramic tiles and panels
ZDB-leaflet: Expansion joints in tile and panel cladding and coverings

All specifications and drawings do not constitute any guarantee in regards to the recommendations provided. Delta Elements assumes no liability and refers to its general business terms and conditions. No rights of any kind can be derived from the contents of this information. The respective current version and the general business terms and conditions can be found at www.deltaelements.eu; printing errors reserved.

Delta Elements Facade CeramicTiles can be processed on suspended, rear-ventilated plaster support systems which are certified by construction authority. Our processing instructions, the processing instructions of the facade system manufacturers and the below listed DIN norms and guidelines have to be observed. You will find our processing instructions at the download center. Further technical information is available on request.
1  Delta Elements Facade CeramicTiles
2  System-joint mortar, slurry method
3  System-adhesive mortar
4  System-equalizing mortar (possibly)
5  System-basic plaster with textile
6  System-priming coat
7  System-facade carrier plate
8  Rear ventilation/aluminium construction
9  System-thermal insulation plate, doweled
10  Sustainable massive ground

Standards and directives
DIN 18157 Installation of ceramic coverings using the glue-fixing method
DIN EN 12004 Mortar and adhesives for ceramic tiles and panels
DIN 18352 Tiling and paving
DIN 18515-1 Exterior wall cladding – tiles or panels applied with mortar
DIN 18540 Sealing exterior wall joints in building construction using joint sealing compound
DIN 18202 Dimensional tolerances for building construction
DIN EN 14411 Tolerances for ceramic tiles and panels
ZDB-leaflet: Expansion joints in tile and panel cladding and coverings

All specifications and drawings do not constitute any guarantee in regards to the recommendations provided. Delta Elements assumes no liability and refers to its general business terms and conditions. No rights of any kind can be derived from the contents of this information. The respective current version and the general business terms and conditions can be found at www.deltaelements.eu; printing errors reserved.

Delta Elements Facade CeramicTiles can be processed on various sustainable massive walls. Our processing instructions, the processing instructions of the facade system manufacturers and the below listed DIN norms and guidelines have to be observed. You will find our processing instructions at the download center. Further technical information is available on request.
1  Delta Elements Facade CeramicTiles
2  Joint mortar, slurry method
3  Adhesive mortar
4  Equalizing mortar
5  Basic plaster with textile
6  Priming coat
7  Sustainable massive ground

Standards and directives
DIN 18157 Installation of ceramic coverings using the glue-fixing method
DIN EN 12004 Mortar and adhesives for ceramic tiles and panels
DIN 18352 Tiling and paving
DIN 18515-1 Exterior wall cladding – tiles or panels applied with mortar
DIN 18540 Sealing exterior wall joints in building construction using joint sealing compound
DIN 18202 Dimensional tolerances for building construction
DIN EN 14411 Tolerances for ceramic tiles and panels
ZDB-leaflet: Expansion joints in tile and panel cladding and coverings

PROCESSING| STORAGE

CERAMIC MOSAIC has to be processed by the floating-method (mortar on one side) according to DIN EN 12004. Full-surface adhesion of the product is essential. The optimum processing temperature is between 5 and 30° C. The product has to be stored implicit dry, in the shade, dust- and frost-proof and has to be processed within 6 month after production date.

The detailed processing instructions can be found here:

Download VHW

To ensure the quality of execution we offer support on construction site in cooperation with our system partners.
Therefore we can provide you with advice for a successful completion of your work.

Ask for our support

LET YOURSELF BE INSPIRED

Privacy

AGB

Contact

Impressum

Facebook-f Instagram Vimeo-v